Questa pagina è disponibile anche in italiano. Passa all'italiano
Free shipping over 250 € · Use code BENVENUTO_GIA for -20 € on your first order over 250 €
Custom prints Popular New Inspiration
Language
IT EN
Wallpaper ·Vintage ·SKU: GIA-1090637-wallpaper

Golden Floral Border on Black

Stylized golden floral motifs create a border on black

–
Enter measurements to calculate
Price per m²
41,18 €33,75 € + VAT

1
Choose the textureselected -
2
Wall measurementsEntered
cm
cm
Minimum size 100×100 cm, maximum 500×500 cm.
3
Position the graphicConfirmed
Enter the measurements (step 2) to unlock
Graphic centred

The intricate detailing of each golden-hued flower immediately draws the eye, standing out against the rich, dark background. This repeating floral border design echoes the timeless appeal of historical textile patterns, such as brocade or damask, lending a sense of classic artistry to any setting. Its sophisticated simplicity evokes an air of subdued luxury and enduring elegance.

Product details
LineaWallpaper
CategoriaVintage
StampaSu misura al centimetro, inchiostri certificati
01
Prepare the wall
The wall must be clean, dry, smooth and free of dust, grease or old glue residue. On new or very absorbent plaster, apply a coat of primer and let it dry: a uniform base ensures optimal adhesion and colour rendering.
02
Check the panels and layout
Check the panels in good light and lay them out in numbered order. The panels arrive pre-cut with a safety margin on each side, so you can trim precisely once hung and match the pattern perfectly between panels.
03
Mark the plumb line
From the first corner, measure the panel width and draw a vertical reference line with a level (or a plumb line). Starting perfectly level is the step that keeps all the following panels straight and aligned.
04
Apply the glue or wet the panel
For traditional substrates, spread non-woven wallpaper paste directly on the wall, one section at a time, without excess at the edges. If you chose a pre-pasted substrate, no glue is needed: simply dampen the back of the panel (or the wall) with a damp sponge and wait a few moments for the adhesive to activate.
05
Hang it and match the pattern
Position the panel along the marked line, leaving a few centimetres of excess at the top and bottom. Match the pattern with the previous panel, then smooth from the centre outwards with the soft spatula to remove air bubbles and creases.
06
Trim and clean
With a sharp blade and a spatula as a guide, trim the excess along skirting boards, ceiling and corners. Immediately remove any glue residue with a clean, damp sponge before it dries. Let the wall dry without direct draughts.
Hanging the first wallpaper drop aligned to the vertical line Step-by-step guide How to hang wallpaper The full photo tutorial: tools you need, how to start perfectly level, corners, sockets and windows, trimming and drying times. Open the guide